Precision CNC Aluminum Main Blade Grip set
Precision CNC Aluminum Main Blade Grip set - BLADE MCPX
25,08 €
Contactez-nous
emailsupport@oxalium.com
Livraisons
settings_backup_restoreLivraison via LA POSTE ou MONDIAL RELAY
Réglements
verified_userPaiement en C.B. 100% securisé ou virement bancaire
The Precision CNC Aluminum Main Blade Grip set is designed to improve stability, durability and performance on the Blade mCP X helicopter. It's directly replaced the stock plastic main grip. The Precision CNC Aluminum Main Blade Grip set is machined with high tolerance from aircraft aluminum to achive the best possible precision and using triple non-shield type ball bearing for the Aluminum Main Blade Grips to avoid stripping and to perform efficiently under high RPM and 3D maneuver condition on Blade mCP X flybarless head system.
And yet, the Aluminum Main Blade Grip design allows pilot to set damping from soft to hard to fit your best flying style. Threaded steel ball join is also used to prevent wear and tear for long time use.
More than that, the Precision CNC Aluminum Main Blade Grip set is very light weight 0.12gram lighter than stock plastic grip while equipped with triple ball bearing and threaded steel ball join.
The Aluminum Main Blade Grip design will bring the best performance and the best look to your Blade mCP X helicopter.
| Includes | |
 |
2 x Precision CNC Aluminum Main Blade Grip |
|
6 x Non-Shield Ball Bearing MR681X |
|
2 x Damper Spacer (Soft) |
|
2 x Damper Spacer (Hard) |
|
2 x Threaded Steel Ball Join |
|
Hardwares |
| Specification | |
|
Aluminum 6061 |
|
Steel |
|
Brass |
| Features | |
|
100% CNC machined Aluminum Main Grip, Threaded Steel Ball Join and Brass Damper Spacer |
|
Improves stability, durability and performance on flybarless head system |
|
Improves the fast cyclic response under high RPM and 3D maneuver |
|
Triple non-shield type ball bearing to avoid stripping |
|
Adjustable damping from soft to hard |
|
Threaded steel ball join to prevent wear and tear |
|
Light weight and stylish Aluminum Main Blade Grip design |
| Weight | |
|
0.79gram/each |
| Usage | |
|
Direct replacement part for Blade mCP X helicopter |
| Requires | |
|
Read and follow carefully the Assembly Instruction |
|
Loctite (#242 is recommended) is required to apply to all mechanical screws for safety during fly |
|
Tools |
| Instruction | |
|
Manual & Instruction included |
MH-MCPX002
Références spécifiques
16 autres produits de la même catégorie:
Precision CNC Aluminum Main Blade Grip set - BLADE MCPX